SATCOM modules are indigenous designs based on our SDR chipsets. We provide a both L and S band MSS terminals, broadcast dongles and transceivers. These are low power, small factor modules supporting a slew of sat-com waveforms. These products currently work with ISRO (Indian Space Research Organization) satellites. Based on customer requests, the modules can be reprogrammed to support specific waveforms and satellites

Satellite S - Band Systems

NAVDOOT is a 2-way Mobile Satellite Service terminal meant for tracking of Vessels and fishing trawlers in deep sea. The terminal is IP68 compliant, with built in battery lasting for 1 day. The terminal works on dynamic TDMA mode with continuous receive and burst transmit option. The transmission bursts could be as small as 200 ms, and transmission boundary conditions are ensured with in-built GPS used for time synchronizing across terminals.

The terminal is capable of IESS waveform reception as 9.6/16/32 kbps data rates, burst transmission is also programmable for fixed or variable length burst with transmit rates of 1.2/2.4/4.8/9.6 kbps in BPSK/QPSK modes of transmission.

Supports

  • Modulation & Coding: QPSK with FEC rate ½ Convolution coding IESS 308
  • RF Tx power: 2 W; +33dBm EIRP
  • Antenna: Patch antenna with ≥ 2.5dBi gain
  • Forward Link: Continuous TDM
  • Return Link: TDMA (Burst of length 250ms / 500ms/ 1s

Features

  • Frequency band: Rx 2560 –2590 MHz;
    Tx2670 –2690 MHz
  • Data rate: Forward Link: 9.6 kbps/16 kbps/ 32kbps
    IESS waveform;
    Return Link: 2.4kbps Burst modulation scheme
  • Channel Access Schemes:
    Dynamic TDMA
    Random ALOHA at 2.4 Kbps for channel allocation
  • Signalling scheme Burst Modulation at 2.4 kbps
    RF Sensitivity: -120dBm @ 32 kbps (QPSK, Rate ½)
  • Performance: 1e-6 BER at 6 dB Eb/N0
  • Interface: Bluetooth for control / Configuration
  • Power Supply: Integrated battery for 24 hr operation,
    external battery of 12V to charge internal battery
  • Interface: Bluetooth for control / Configuration
  • Form Factor: 203 mm x 156 mm x 105 mm.
  • IP 67 casing with mast mount facility

Locomotive Tracking terminal is a 2-way Mobile Satellite Service terminal for real time tracking of locomotives. These devices have integrated S-band and GPS modules, transmitting live location data to remote HUB through the satellite. The terminals are mounted on top of locomotives and henace are designed to work in harsh environment. Usage of power over ethernet, simplifies the connectivity between the modem and the indoor unit.

Supports

  • Modulation & Coding: QPSK with FEC rate ½(Viterbi+RS) custom TDM modulation
  • Payload: Data
  • RF Tx power: 4 W; +36dBm EIRP
  • Patch antenna with ≥ 2.5dBi gain
  • GPS Module

Features

  • Form Factor: 203 mm x 156 mm x 105 mm
  • Frequency band: Rx 2560 –2590 MHz; Tx2670 –2690 MHz
  • Channel Spacing: Tx: 10 KHz
  • Data rate: Forward Link: 32 kbps/Scalable upto512kbps; Return Link: 2.4kbps
  • Channel Access Schemes: Random ALOHA
  • Signalling scheme Burst Mod at 2.4 kbps
  • RF Sensitivity: -122dBm @ 32 kbps (QPSK, Rate ½)
  • Performance: 1e-6 BER at 6 dB Eb/N0
  • Interface/Power Supply: PoE; 12-48V